Ssangyong Rexton SUV

New look

Visually, the new upcoming Rexton seems wider and bold. The chrome grill is lot more stretched and sharp then all the predecessors. Front bumper design is really expressive and gives an aggressive look to the design. Other distinct changes are re-shaped tail light and squarish rear bumper. Daytime LED light comes fitted into headlamp housing. As long as specs are concerned, we don’t have much of a clue yet. However, we believe, SsangYong would fit in 2L diesel powered engine initially.

Ssangyong Rexton SUV

This is going to be the fourth upgrade on Rexton. After the initial launch in 2001, it received second update in 2006. The Second generation Rexton launched mainly in Malaysia. The third generation Rexton came out in 2010. Rexton III is, in fact, doing pretty well for its lower emission standard and fuel efficiency.

Indian Rexton

Mahindra is planning to bring in Rexton buy last quarter of this calendar year. We already wrote in length on this issue. However, India will get basically third-generation Rexton.

Upcoming Rexton will come out on Busan Motor, which will start on 24th of this month. We won’t see the vehicle on Indian road until next year, if at all Mahindra wish to bring it in. Primary target market for new Rexton would be South Korean market, Europe and other few international markets like Australia. However, nothing is official at this moment. We believe SsangYong has lot of work to do.

Mahindra’s upgraded Thar

The a/c fitted New Cool Thar will allow vehicle owners to navigate challenging terrains in the utmost comfort and the company’s swift response to the needs of its customer’s shows how serious it is about retaining and expanding its customer base. At the launch of the New Cool Thar, the company also showed off a bespoke custom variant of the model dubbed the Thar Expedition that boosts the model’s off-road capabilities via features like a roll cage, expedition carrier, snorkel, rock sliders and an integrated electric winch on the front bullbar custom-made for this version of the Thar.

With the launch of its much awaited off-roader, Mahindra also officially unveiled the upcoming season’s Adventure calendar that would feature events in categories like Multi-day Escapes, Challenges and Great Escapes.

Custom Mini Cooper

This mini is the ultimate petite version of a full sized on-road species. The parts that make up the whole four-wheeler are also notably splendid. Let us have a closer look!

Picture Gallery

Custom Mini Cooper

Custom Mini Cooper in new avatar is a real beast

The air outlet of this mini monster seeks attention. We are certain the mini engine of this mini vehicle will reminded you of the Vin Diesel vehicle that you might have seen in the movie ‘The fast and the furious’. Surprisingly, it integrates all the heavy duty elements within its petite skeleton as that of the muscular Vin Diesel road giant. You will be simply jaw dropped as you take a look at its MK grill. The clear contour of the engine, fully functional wipers made from stainless steel and well formed arches satisfy all the basic needs of a car freak.

The interiors of the same also need equal attention. Once you glance at the seat inside the car, you will be all the more pleased with its ultra stylish sporty look. However, besides its aesthetic magnificence, the makers have been equally concerned about the relaxation of those within the same too. So, you will get stunning looks as bonus on seat comfort.

Finally, hold your breath for the wheels of this customized mini! They are the super cool Rebel wheels with whopping 13” x 8” diameter. The tires of the same can challenge an on-road monster any day with their groovy contours and heavy built. They look quite impressive as well when road safety is considered.So, this mini is undoubtedly not the version that you see often!

Airplane food truck

The DC3 Airplane used for the kitchen was built in 1944 and was used during World WAR II. After a decade of service, it was allegedly hijacked to Cuba. In 1976 it was converted for street use and was mounted on a GMC Bus frame. Then once again in 2001, it was purchased and this time around was transformed into a self contained commercial kitchen.

The Space Shuttle Cafe is capable of hosting a wide variety of events ranging from craft fairs, weddings, birthday parties, car shows, air shows , corporate events and the list is endless, all thanks to the space management and flexibility of the structure.

The completely self contained structure is lush with all features of a sophisticated kitchen, including a 32 gallon fresh water tank, 4500 watt commercial quiet generator, two 7.5 gallon propane tanks, commercial burner and grill, deep fryers, exhaust hood with 3 exhaust fans and 6 grease filters, etc.The cooking area is completely draped with stainless steel, including the sinks, tables, shelves and other cooking units.

Space Shuttle Cafe is now up on eBay with an asking price of $150,000 and I am sure, every penny of investment will be worth the services it is capable of offering. Its vintage ambiance and delectable work space make it a good preposition for both the purchaser and his would be customers.

Airplane food truck

Airplane food truck interior

Astronaut welcomes guest in restaurant

Space Shuttle food truck

Space Shuttle food truck

Custom Chevy Silverado dually

It is extremely important for any pick-up truck meant for kick starting cars at Bonneville, to have an efficient traction system. The traction system of the Double dually is superb thanks to the eight driven wheels on the pickup truck’s custom-made rear sub-frame. The Dually was originally conceived to be run on a supercharged GM 8.1 V8 engine, which has now been subsequently equipped with Cadillac big block 500 cubic inch Garret turbochargers. Built by expert car designers at the Cadillac factory, the motors shell out a max horsepower if 1,425 hp and 1.671 foot pounds of torque. Once the monstrous Caddy motor was installed, the car’s front suspension, was modified with basic features like QA1 shocks, one-off upper and lower control arms and Firestone 26C airbags.

Each piece of the suspension has been with black powder to ensure rust-free functioning. The piping for the Air intake and charge cooler are custom made by using 3 and 4 inched ProFab Quikits that Spectre Performance specializes in. These Quikits are smart and flexible enough to be assembled according to any design specification and can either be welded by the designer himself or sent to the Spectre Performance factory for assembling. A Paxton NOVI 1200 Supercharger enables the gargantuan 8.1L V8 engine to breathe while sending air to the blower through a triple funnel shaping elevated-flow filters that are integrated into large intake tube that feeds the supercharger.

Picture Gallery

Custom Chevy Silverado dually

1400hp Custom Chevy Silverado dually is a roaring monster

Finally, The car’s upholstery which consisted of an entirely plastic interior was given stylish looks thanks to the efforts of Rogelio Auto Upholstery based in Baldwin Park, California. The car seats have been draped in light leather tan with black piping and a black colored leather headliner and black carpets. The dash was painted black to compliment the color scheme of the seats and outside look of the vehicle, while the red tint and the customized Vintec steering wheel adds to the chic look. The car’s audio system and sub-woofers has been designed by Memphis, while the sub woofers are positioned additionally in a double toned leather encased surrounding that look amazing from the back seats. An automatic personal computer with a 10-inch touchscreen maneuvering the Audio and video systems has been integrated into the dash that heightens the functional yet classy image of this show truck.

Even as people try double and triple takes in trying to figure out this car, there is no ambiguity in attesting the true essence of its build and efficiency. The car’s mobility is pleasant and smooth, the design has laid ample enclosure over big wheels, and can actually burn all the eight rear tires to good use. This car sounds like the ideal show stopping Towing and Pushing truck innovated by Spectre Performance.

Via: Speedhunters

Ferrari Hybrid

The vehicle would reduce the supercar’s fuel consumption by 40 percent though the powertrain on the vehicle is rumored to be good enough produce more horsepower than any other previous model thanks to a combo of a 660-horsepower 12-cylinder gas engine and two 100 horsepower electric motors with a two clutch gearbox.

The Hy-Kers hybrid technology would allow the Enzo successor to meet increasingly stringent emission rules thanks to technology developed for Ferrari’s Formula One racing wing. The Hybrid Ferrari F70 is expected to be priced above the EUR 660,000 Enzo with the vehicle being produced in a limited-edition run. According to sources, the model is most likely to be unveiled in the latter half of this year.

Via: SF Gate

Jay Leno with Tata Nano

Pictures taken at the event depict a humble Mr. Leno bowing in front of the Nano, with his hands joined in a Namaskar. The Nano in the backdrop is shown to have the Indian Flag painted on it, symbolising the importance of the place where its genesis began.

Jay Leno with Tata Nano

To gel well with the setting, Leno himself wore a sherwani for the event, subtly paying homage to Bollywood desiness. This was the most unlikely departure, as people are so used to see him in his denim shirts, that media almost went abuzz over his costume, sidelining even the Nano.

Nano has seen many proud moments since it was launched, and its ‘cheapest car’ status somehow puts it in the league of worth having cars. People don’t shy away from placing it next to big honchos like Lamborghini or Porche. And never late than ever, it has finally won a place in Je leno’s garage. We wish him good luck with his ride in the tiny marvel.

2012 F1 motion simulator

Fitted around a 2012 model year F1 Showcar chassis, the full size motion simulator features a reinforced pedal system from Logitech, a simulator steering wheel with Logitech reinforced force feedback, a 22 inch LCD monitor, rFactor simulator software fitted in-built PC and a racing cockpit that mimics the Formula 1 car shape to the tee. To make the experience even more authentic, the 2012 Design F1Showcar™ Motion Simulator comes with a suspension covered in carbon-fiber, full bodywork in fiberglass composite and turning and dirigibleF1 size wheels wrapped with real rubber competition racing tires.

Picture Gallery

2012 F1 motion simulator

2012 F1 motion simulator formula factory

The bodywork layout of the 2012 Design F1Showcar Motion Simulator has been matched as closely to real Formula 1 racecars as possible though the customer can order the vehicle in custom-paint finishes and designs according to their personal preferences. Other custom fittings and optional add ons to the 2012 Design F1Showcar Motion Simulator include a Hydraulic Motion platform system that could be fitted in the simulator instead of the standard pneumatic system that costs an extra US$10,500, three 22” LCD screens that are the largest reasonable size the simulator can be fitted with and come included with rFactor software as well as a Panoramic View Triple Monitor System with PC which costs an extra US$3,100. The motion platform itself comes with a car cover, a surround sound system, a 1.62g max acceleration, 1100 lbs payloads up handling capacity and a ± 7° max roll/pitch.

The 2012 Design F1Showcar Motion Simulator weighs 1210 lbs (550 kg) and measures 5.9 feet (180 cm) in height, 5.9 feet (180 cm) in width and 15.4 feet (475 cm) in length. The chassis for the 2012 Design F1Showcar Motion Simulator is equipped to fit drivers weighing up to 198 lbs (90 kg) and 190 cm (6.16 feet) in height. For easier transportation, the simulator comes with a removable nosecone though the 2012 Design F1Showcar Motion Simulator cannot be finished with the same logos and graphics that actually F1 cars comes with due to copyright and tobacco laws.

The 2012 Design F1Showcar Motion Simulator can be reserved with a Credit Card deposit worth USD 500 and the base price of the simulator starts at US$39,900 with custom fittings costing extra.

[Thanks for the tip, Andy]

Brabus to Tune Private Jets

Brabus opens up its offers to heavy jets like Bombardier Global express, Challenger aircraft families and Dassault Falcon series. The tuner customizes new jets as well as the existing ones. In addition, Brabus extends its customization facilities to larger liners. Initially, the company has proposed two stupendous customization packages namely Elegance and Sportive that are scheduled to be displayed at the European Business Aviation Convention and Exhibition during May 14 to 16, 2012 in Geneva, Switzerland. To be short and precise,

Elegance flaunts cream colored fine leather, Alcantara and superior class wooden materials along with glossy touch-ups. On the other hand, the Sportive package boosts carbon fiber, black and grey leather upholstery and Alcantara as well along with decorous stitching pattern and contrasting colors. Car enthusiasts who are familiar with Brabus’ customization style would very well recognize these packages and their inspirations on the first glance itself.

Above all, Brabus brings in the comfort of sophisticated multimedia features inside the jets. The tuner’s meticulous integration system let users to enjoy affluent entertainment through their Ipad or Iphone while on the air and utilize the same multimedia devices on their Brabus customized cars while in the ground.

They also offer technical assistance on sourcing, purchasing and management services through its partner PrivateAir. Brabus also customizes the exterior design of the aircraft according to the stringent aviation rules and regulations. To mention, Brabus’ customization works are approved in accordance with FAS and EASA regulations. Indubitably, the tuner’s plunge into the aviation industry will enthrall the private jet owners and automobile enthusiasts for sure.

Brabus Customise Private Jets

Brabus Private Jets’ interior

Brabus Customise Private Jets

Brabus Customise Private Jets

Brabus Customise Private Jets

Brabus Customise Private Jets wings

Via: Mercedes Benz blog and Brabus Aviation

Lego Land-Rover Defender 110

Picture Gallery

Land-Rover Defender 110

Lego Land-Rover Defender 110

Used all around the world for its sturdiness and dependability in cross country escapades, the extraordinary Lego Land-Rover Defender model is made in 1:8.4 scale and stands at 29 inches high sans the roof, 65 inches long and 28 inches wide. What makes the Lego model truly extraordinary though is the fact that it is a fully working model controlled by a remote controller. Using the controller, users can change the vehicle’s speed, disconnect the clutch or operate its sequential gearbox with 5+R speeds.

Offered in both all wheel drive and rear wheel drive configurations, the Working Lego Land-Rover Defender 110 Model has a long-travel suspension with live axles in the front and rear. The model is operated via 7 PF motors and 3 IR receivers that allow it to travel at maximum speeds of 2.5mph.

The Working Lego Land-Rover Defender 110 Model stays true to the original model with disc brakes in all wheels, a fake 4-cylinder engine stacked under the hood, a RWD-AWD selector, a Transfer case, a Sequential gearbox, steering wheel and a gearbox speed indicator along with full interiors mimicking the original vehicle’s cabin. The Working Lego Land-Rover Defender 110 Model can be easily assembled and dissembled and if it receives 10,000 votes from fans, Lego might be prompted to officially launch the set as a branded creation.

Via:Sheepo